iBG iLog Strain Gauge/Bridge Data Logger

iBG iLog Strain Gauge/Bridge Data Logger

The iLog Strain Gauge/Bridge is low cost, high accuracy, battery powered, stand-alone data logger records the Strain Gauge/Bridge signals. Data are stored in 4MB non-volatile flash memory for later retrieval. 

The logger supports 6-wire full bridge configuration by providing excitation power and excitation wire compensation for most accurate requirement. 

It offers wide input range selections suitable for applications such as strain gauge, load cell and pressure sensor etc. 

Its aluminum enclosure makes it excellent in the harshest industrial environment. Plug & Play USB port and versatile custom equation simplify communications and engineering unit conversion. 

16-bit ADC makes it well suited for science and laboratory applications where precise and accurate measurements are critical. 

Simply plug the logger to USB port of PC, the software automatically recognizes it, making it extremely easy to configure, download and view the plot. 

Features:

  • 16-bit analog-to-digital converter
  • 4 megabyte memory size
  • Both USB and serial interfaces with auto baud rate of up to 115200 bps
  • Over 10 years of battery life
  • Powerful software for configuration, downloading, plotting, analysis and alarm reporting
  • Configurable alarm controls/excitation controls
  • Wide sampling interval selections (30 milliseconds to 12 hours)
  • Rugged aluminum enclosure

Documents:

iLOG Strain Gauge Data Logger Specifications

iLOG Strain Gauge Data Logger Wiring and Equations

SiteView Specifications


Want to remotely access this data logger? Check out DSS-2 Site USB Device Server


General
Product Name iLOG Strain Gauge/Bridge data logger
Model iBG-8, iBG-16, iBG-32
Inputs
Connection Pluggaable terminal block for:
Excitation voltage output (2.5 VDC, max load current: 5mA)
Excitation sense input (2.5 VDC)
Strain/Bridge input
Alarm and excitation control outputs
Channels One excitation sense 2.5 VDC channel.
One bridge input channel:
iBG-8: ± 8mV
iBG-16: ± 16mV
iBG-32: ± 32mV
Resolution 0.0018%
Accuracy ± 0.2% FSR @ 25°C for iBG-8
± 0.1% FSR @ 25°C for iBG-16
± 0.05% FSR @ 25°C for iBG-32
Input Impedance < 1OHms
Over-Current Protection Up to ± 100 mA
Overvoltage Protection\ Up to -3VDC ~ +40VDC
Alarms
Channel Alarms Two editable alarm thresholds per channel.
Alarm Indicator On-board LED becomes red when in alarm condition.
On-board Memory
Size 4 Mega bytes (2MB readings).
Data Retention Over 20 years.
Sampling
Sampling Interval 30 milliseconds to 12 hours user selectable.
Logging Mode Stop recording or FIFO when memory is full.
Logging Activation Programmable instant, start delay or field push button activation.
Communications
Interface USB (Mini-USB-B) (USB-A-mini USB-B Cable included)
AUX(RJ11) for direct TTL level communications
Baud Rate Auto-detect baud rate from 2400 to 115200 bps on both USB and AUX.
Battery
Power Built-in 3.6V Lithium Battery.
Battery Life 12 years based on 1 minute sampling interval in stand-alone mode.
Software
SiteView (Sold separately) Configuration, downloading, plotting, real-time view, custom calibration and custom equation.
Software Requirement Computer with 1.0 GHz or faster processor
1 GB Memory or higher
10 GB of available hard-drive space or higher
Windows XP with SP2 or later, Vista, Window 7,8,10
At least one USB port or one COM port.
Physical
Material Aluminum enclosure.
Dimension 88 X 64.2 X 24 mm (3.46 X 2.53 X 0.95 inches).
Weight 200g
Mounting Probe/wall-mount holes for hanging/mounting.
Others
LED Indicator Tri-Color LED: (can be disabled for power saving)
Normal Sampling: light green when sampling.
Alarm: red when sampling.
Low Battery: amber when sampling.
Operating Environment -40 ~ +70 °C (-40 °F ~ 158 °F), 0 ~ 95% RH non-condensing.
Clock Accuracy ±1 mintue per month.
Approval CE, FCC

Logger Memory Capacity

Sampling Interval Logging Capacity
1 minute 2 years
10 seconds 121 days
1 second 12 days
  • $538.00(USD)

Available Options

Tags: strain gauge data logger, iBG