LRHT-2 SITE-LOG Relative Humidity Data Logger

LRHT-2 SITE-LOG Relative Humidity Data Logger

SITE-LOG LRHT-2 ( with an external 3-foot sensor probe ) is a 2-channel, battery powered, stand-alone data logger, with storage up to 8 MB of data in non-volatile flash memory. Its aluminum enclosure makes it excellent in the harshest industrial environment. 

Plug & Play USB port and versatile custom equation simplify communications and engineering unit conversion. Powered by Sensirion high performance digital RH sensor, the LRHT-2 logger is well suited for science and laboratory applications where precise and accurate measurements are critical.

Simply plug the logger to computer's USB port, and the software automatically recognizes it and handles the configuration, downloading, graph viewing and more...

Features:

  • 8 megabyte memory size
  • Both USB and serial interfaces with auto baud rate of up to 115200 bps
  • Sensirion RH Digital Sensor
  • Powerful software for configuration, downloading, plotting, analysis and alarm reporting
  • Configurable alarm controls/excitation controls
  • Wide sampling interval selections (from 1 second to 12 hours)
  • Rugged aluminum enclosure
  • Coated PCB to protect against moisture, corrosion and mildew.

Documents:

SITE-LOG Relative Humidity Data Logger (LRHT) Specifications

SiteView Specifications

General
Product Name SITE-LOG Relative Humidity Data Logger
Model LRHT-2
Inputs
Channels Relative humidity (0 ~ 100% RH)
Temperature (-40°C ~ 70°C, -40°F ~ 158°F)
Resolution Temperature channel: 12-bit
Relative humidity channel: 12-bit
Accuracy Temperature:+/- 0.4°C at 25°C
Relative humidity channels: +/-3% (20% - 80% RH)
Sensor Probe 3-foott long, terminal block connector
Alarms
Channel Alarms Two editable alarm thresholds per channel.
Alarm Output ALARM1 & A2/E terminal strips can be configured as alarm outputs.
Alarm-On: MOSFET(N-Channel) switch on
Alarm-Off: MOSFET(N-Channel) switch off
Max Power: 200mA @ 24VDC
Alarm-On Delay Programmable 0 - 10 minutes delay with 1-minute increment.
Alarm Indicator On-board LED becomes red when in alarm condition.
On-board Memory
Size 4 Mega bytes (4MB readings).
Data Retention Over 20 years.
Sampling
Sampling Interval 1 second to 12 hours programmable. (external power supply required if interval less than five seconds)
Logging Mode Stop recording or FIFO when memory is full.
Logging Activation Programmable instant, start delay or field push button activation.
Communications
Interface USB (Mini-USB-B) (USB-A-mini USB-B Cable included)
AUX(RJ11) for TTL level RS232 communications.
Baud Rate Auto-detect baud rate from 2400 to 115200 bps on both USB and AUX.
Battery
Power Built-in 3.6V Lithium Battery.
Battery Life 5 years based on 1 minute sampling interval.
Software
SiteView (Sold separately) Configuration, downloading, plotting, real-time view, custom calibration and custom equation.
Software Requirement Computer with 1.0 GHz or faster processor
1 GB Memory or higher
10 GB of available hard-drive space or higher
Windows XP with SP2 or later, Vista, Window 7,8,10
At least one USB port or one COM port.
Physical
Material Aluminum enclosure.
PCB Treatment Conformal coating.
Dimension 88 X 64.2 X 24 mm (3.46 X 2.53 X 0.95 inches).
Weight 200g
Mounting Probe/wall-mount holes for hanging/mounting.
Others
LED Indicator Tri-Color LED: (can be disabled for power saving)
Normal Sampling: light green when sampling.
Alarm: red when sampling.
Low Battery: amber when sampling.
Excitation Control A2/E terminal strip can be configured as excitation control output for driving the power of connected devices.
Warm-up delay interval settings: 10 to 240 seconds with 10-second increment.
Operating Environment -40 ~ +70 °C (-40 °F ~ 158 °F), 0 ~ 95% RH non-condensing.
Clock Accuracy ±1 mintue per month.
Approval CE, FCC

Logger Memory Capacity

Sampling Interval Enabled Channel Logging Capacity
1 minute 1 4 years
1 minute 2 2 years
10 seconds 1 242 days
10 seconds 2 121 days
1 second 1 24 days
1 second 2 12 days
  • $428.00(USD)

Tags: LRHT-2, rh data logger